| Products |
Trade Name |
Description  |
Content |
Office Space System
|
|
|
|
|
|
|
|
|
|
|
|
|
High strength cement fill, along with steel designed
in the corners where it is needed, gives ASM the best
corner panel loading in the industry.
|
|
|
|
|
|
|
|
|
|
The Quick Loc Pedestal (patent pending) is the only pedestal that supports the panel on both the flange and the beam. This design transfers the load to the center axis of the pedestal where it is supported by the vertical shaft of the pedestal. The load is transferred directly down the center of the pedestal column. This eliminates rocking which can happen when a standard flat head pedestal supports the beam of the panel.
|
|
|
|
|
|
|
|
|
|
A green building provides improved indoor environmental quality. It conserves significant material resources, and saves in maintenance and operation.
|
|
|
|
|
|
|
|
|
|
Building on a successful and innovative past, ASM has developed the Environmental Systems Workplace (ESW).
ESW is the culmination of proven technologies, adapted to the demands of today's rapidly changing work
environment. Designed for the workplace of the information age, with advanced communications, for tomorrow
and beyond.
ESW completely integrates the technological requirements of occupant health, comfort, and environmental
efficiencies into one cost-effective ultimately flexible system.
|
|
|
|
|
|
|
Data Center System
|
|
|
|
|
|
|
|
|
|
|
|
|
Here are just three of many features that deliver the strength and safety you need in your data center:
1. Electrical Grounding: protect your equipment and data
2. Nickel Chrome Plating: eliminate the hazards of zinc whiskering
3. High Strength: the industry's strongest understructure
|
|
|
|
|
|
|
|
|
|
High pressure plastic laminate is used in 90% of all computer room applications, and is the largest product used on factory laminated floor
finishes. Laminate is a one piece tile (24" x 24") and unlike vinyl, will provide a uniform finish with no joints. HPL has the advantage of not
requiring wax or maintenace that could produce static problems in the data center.
|
|
|
|
|
|
|
FS-Series Panel System
|
|
|
|
|
|
|
|
|
|
|
|
|
Our best seller, the FS-Series Panel system, is constructed of a welded structural steel assembly designed to accommodate ultimate and dynamic loads. Its specially formulated cementitious fill and powder coated epoxy finish give the FS panel a quiet and very solid feel underfoot. Panel systems are available in both 24” x 24” and 600mm x 600mm.
|
|
|
|
|
|
|
S-Series Panel System
|
|
|
|
|
|
|
|
|
|
|
|
|
The S-Series hollow steel panel system uses the same welded steel technology found in the FS panel. With its high strength and light weight, the S-Series panel is the product of choice for many computer room applications. This panel has the ability to interchange with the FS panel, allowing for ultimate flexibility in flooring design. Panel systems are available in both 24” x 24” and
600mm x 600mm.
|
|
|
|
|
|
|
MC-Series System
|
|
|
|
|
|
|
|
|
|
|
|
|
The ASM MC125 Panel is constructed of a high density composite core encased in a sheet metal shell. The MC Systems offer high performance characteristics in a fair valued product. Its solid
feel and light weight offers an economical solution to your access floor needs..
|
|
|
|
|
|
|
Low Profile Floor Systems
|
|
|
|
|
|
|
|
|
|
|
|
|
The ASM low profile system is perfect for retrofits, or any building where low ceiling space is an issue. This system utilizes the ASM low profile pedestal (LPP) to achieve a low profile floor system.
|
|
|
|
|
|
|
AirFlow Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
ASM's Accel-Air die-cast aluminum air flow grate is our latest addition. With its 56% free open area, it is the best air flow panel in the industry when it comes to moving air. Made from high quality aluminum, it is available in a raw casting or powder coated epoxy finish. The Accel-Air Grate is the best solution for creating "cold" aisles for your server and equipment rooms to ensure no
overheating.
|
|
|
|
|
|
|
|
|
|
The AF200 is ASM's standard perforated air flow panel. It has a free open area of 25% to allow significant air flow. It is completey interchangeable with the FS and S-Series panels. It properly distributes air flow to those areas where additional air is required. An adjustable damper assembly can be attached if required. Without a damper, you are capable of achieving 600 CFM at 0.1
Static Pressure.
|
|
|
|
|
|
|
Understructures
|
|
|
|
|
|
|
|
|
|
|
|
|
The Quick-Loc Pedestal (patent pending) is the only pedestal that supports the panel on both the flange and the beam.
This design transfers the load to the center axis of the
pedestal where it is supported by the vertical shaft of the pedestal. The load is transferred directly down the center
of the pedestal column. This eliminates rocking which can
happen when a standard flat head pedestal supports the
beam of the panel.
|
|
|
|
|
|
|
|
|
|
This is the most widely used system for general offices
where carpet tile is to be installed. This system is utilized
when a fully intergrated, locking system is required for
mounting equipment to the access floor system. It is recommended to use a rigid grid stringer for additional
strength and support. A1/4-20 threaded fastener secures
the panel firmly to the pedestal system in each corner of
the panel.
|
|
|
|
|
|
|
|
|
|
Offering great lateral support, this system is generally used
where the panels are gravity held on the understructure.
Stringers are available in 2' (600 mm) and 4' (1200 mm)
lengths allowing for standard (2' x 2') or basketweave
installations (4' x 4' or 4' x 2'). Every ASM stringer is hot
dipped galvanized to preclude the possibility of equipment
shorting as a result of zinc whiskering. Every ASM stringer
boasts solid tube construction to resist bowing and spreading
during load impacts, and a solid vinyl strip for a snug, quiet
fit between stringer and panel.
|
|
|
|
|
|
|
|
|
|
ASM offers the most comprehensive variety of pedestal types
allowing for durable strength in any of zones 1 through 4.
This full line of pedestals can further be strengthened by
bolting them to the concrete slab for the most solid access
flooring systems available. ASM introduces its Atlas Pedestal
Systems, designed for optimal heavy duty support and for
the most severe conditions. No other system compares for
strength and simplicity.
|
|
|
|
|
|
|
Raised Access Floor System
Accessories
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed of a high grade galvanized steel frame 2 mm thick, with a virtually indestructible Lexan lid. The RFB100 box can be supplied empty for site installation of outlets or pre-wired with a customized variety of electrical, voice or data outlets to meet every requirement.
|
|
|
|
|
|
|
|
|
|
The ASM Smart-Air Diffuser is a low velocity air diffuser. Designed for use in an access floor system using the under
floor area as a pressurized supply air plenum. The attractive turbine patterned face produces a low velocity helical discharge pattern that achieves a high induction rate of conditioned air, obtaining optimum circulation and human comfort conditions.
|
|
|
|
|
|
|
|
|
|
Grommets and trims allow for simple connection of electronics through clean and attractive cut-outs. The face of the grommet slides to provide for cable adjustment.
|
|
|
|
|
|
|
|
|
|
For those highest risk seismic projects, ASM offers one, two, three and four leg seismicbraces that can easily be attached to any ASM raised floor pedestal for ultimate lateral support.
|
|
|
|
|
|
|
|
|
|
ASM provides a variety of lifting devices, including double
suction cup and airflow panel lifters - designed to make installations and alterations simple. They can be easily stored
in Lifter Wall Mount Brackets.
|
|
|
|
|
|
|
|
|
|
Cooper B-Line's F.A.S.T.™ Underfloor Cable Tray System provides maximum accessibility and flexibility for your raised floor cabling needs.
|
|
'>
|
'>
|
'>
|
|
|
|
|
|
HandRails
The ASM Handrail System is a clear anodized aluminum extruded railing. The system meets ADA requirements, ASTM
E-985, and the latest UBC codes. There are many design features that set our railing system apart from our competitors.
|
|
|
|
|
|
|
Raised Floor Finishes
|
|
|
|
|
|
|
|
|
|
|
|
|
- VPT uses a process to ensure the conductive elements are distributed evenly through the entire tile thickness. This, along with the finest materials, ensures a lifetime of consistent conductivity regardless of wear.
- VPT carries a lifetime conductivity warranty.
- VPT has a superior polished finish that does not require special treatments or waxes to maintain conductivity or appearance.
- VPT is a homogenous material, which means that the pattern on top runs all the way through. So no matter how much wear it gets, the pattern will always be there.
|
|
|
|
|
|
|
|
|
|
|
Designed Specifically for Raised Access Floors in Conjunction with
Platts Laminate Technologies.
|
|
|
|
|
|
|
|
|
|
Opimized Resin Formulas and Press Time For The Best Performance.
|
|
|
'>
|
'>
|
|
|
|
|
|
|
|
|
|
|
|
|
Request
