Carfaro, Inc. ARCAT SpecWizard

1. Configure Carfaro, Inc. - HANDRAILS AND RAILINGS:

RAILINGS

Railing Style:

Channelpipe

Top Rail: 1 7/8 inch wide by 1 7/8 inch tall (48mm x 48mm) cylindrical profile.

Bottom Rail: 1 1/2 inch wide by 1 1/2 inch tall (38mm x 38mm) square rail.

Height Requirement:

Snap Cap

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Classic

Top Rail: 2 inch wide by 1 7/8 inch tall (51mm x 48mm) sculpted profile with a traditional wood railing appearance.

Bottom Rail: 1 1/2 inch wide by 1 1/2 inch tall (38mm x 38mm) square rail.

Height Requirement:

Snap Cap

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Classic II

Top Rail: 2 15/16 inch wide by 2 1/4 inch tall (75mm x 57mm) sculpted profile with a wide wood railing appearance.

Bottom Rail: 2 1/2 inch wide by 1 3/4 inch tall (64mm x 44mm) coordinating sculpted rail.

Height Requirement:

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Classic III

Top Rail: 3 inch wide by 2 1/4 inch tall (76mm x 64mm) sculpted profile with a wood railing appearance.

Bottom Rail: 1 1/2 inch wide by 1 1/2 inch tall (38mm x 38mm) square rail.

Height Requirement:

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Colonial

Top Rail: 2 1/4 inch wide by 1 7/8 inch tall (57mm x 48mm) colonial styled railing with a pitched profile and fluted sides.

Bottom Rail: 2 1/4 inch wide by 1 1/2 inch tall (57mm x 38mm) coordinating colonial style rail.

Height Requirement:

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Coronado

Top Rail: 3 inch wide by 2 9/16 inch tall (76mm x 65mm) railing with a round profile.

Bottom Rail: 1 1/2 inch wide by 1 1/2 inch tall (38mm x 38mm) square rail.

Height Requirement:

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Laguna

Top Rail: 2 5/8 inch wide by 1 1/2 inch tall (66mm x 38mm) railing with a short profile and rounded top.

Bottom Rail: 1 1/2 inch wide by 1 1/2 inch tall (38mm x 38mm) square rail.

Height Requirement:

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Newport

Top Rail: 2 1/4 inch wide by 4 inch tall (57mm x 102mm) railing with a tall profile and rounded top.

Bottom Rail: 1 1/2 inch wide by 1 1/2 inch tall (38mm x 38mm) square rail.

Height Requirement:

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Standard

Top Rail: 2 1/4 inch wide by 1 1/8 inch tall (57mm x 29mm) railing with a traditional wrought iron railing appearance.

Bottom Rail: 1 1/2 inch wide by 1 1/2 inch tall (38mm x 38mm) square rail.

Height Requirement:

Snap Cap

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

Traditional

Top Rail: 2 1/4 inch wide by 1 7/8 inch tall (57mm x 48mm) railing with a highly decorative contour profile.

Bottom Rail: 1 1/2 inch wide by 1 1/2 inch tall (38mm x 38mm) square rail.

Height Requirement:

Snap Cap

Picket Style:

Picket Spacing: Picket spacing must disallow the passage of a 4 inch (101.6mm) sphere through the fence at any point

Support Posts:

Post Cap:

READYRAILING:

ACCESSORIES

FENCES

Fence Style:

Two-Line Picket: Standard fence with upper and lower rails. Pickets extend through upper and lower rails.

Rails: Two - 1 1/2 inch wide by 1 1/2 inch deep (38mm x 38mm) aluminum U-channel.

Height Requirement:

Two-Line Flush Top: Standard fence with upper and lower rails. Flush top pickets extend through lower rails.

Rails: Two - 1 1/2 inch wide by 1 1/2 inch deep (38mm x 38mm) aluminum U-channel.

Height Requirement:

Three-Line Picket: Standard fence with two upper rails and one lower rail. Pickets extend through upper and lower rails.

Rails: Three - 1 1/2 inch wide by 1 1/2 inch deep (38mm x 38mm) aluminum U-channel.

Height Requirement:

Three-Line Flush Top: Standard fence with two upper rails and one lower rail. Flush top pickets extend through lower rails.

Rails: Three - 1 1/2 inch wide by 1 1/2 inch deep (38mm x 38mm) aluminum U-channel.

Height Requirement:

Four-Line Picket: Standard fence with two upper and lower rails. Pickets extend through upper and lower rails.

Rails: Four - 1 1/2 inch wide by 1 1/2 inch deep (38mm x 38mm) aluminum U-channel.

Height Requirement:

Four-Line Flush Top: Standard fence with two upper and lower rails. Flush top pickets extend through lower rails.

Rails: Four - 1 1/2 inch wide by 1 1/2 inch deep (38mm x 38mm) aluminum U-channel.

Height Requirement:

Pickets:

Picket Style:

3/4 inch (19mm) extruded square aluminum

Finial Style:

Finial Material:

3/4 inch (19mm) extruded square aluminum with stamped spear head - 4 inch (102mm) rise above rail.

3/4 inch (19mm) extruded square aluminum with flat cap - 4 inch (102mm) rise above rail.

Support Posts:

Post Size

2 1/2 inch (64mm) square extruded aluminum end, line, thru or corner post with a

3 inch (76mm) square extruded aluminum end, line, thru or corner post with a

4 inch (102mm) square extruded aluminum end, line, thru or corner post with a

GATES

FINISHES

2. When you are finished making selections:

Generate Spec:

Word

WP or

RTF