| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| 1. Configure Baillargeon Doors Inc. - ARCHITECTURAL FLUSH WOOD INTERIOR DOORS: |
| | Warranty: |
  | ARCHITECTURAL FLUSH WOOD INTERIOR DOORS |
 |  | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Ultra-Heavy Duty Wood Interior Door: |
| | | Product: |
| | | Stiles: 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as per ASTM-D5456-93 (LVL), including a |
| | | 7/8 inch (22 mm) piece of hardwood, matched with faces, for a total width of 4-3/16 inches (107 mm). |
| | | Top and bottom rails: 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as per ASTM-D5456-93 |
| | | (LVL), for a total width of 3-5/16 inches (85 mm). |
| | | Stiles and Rails: Bonded to core. |
| | | Core: |
| | | Fire Rating: 20-minutes, in compliance with NFPA 80 (Baillargeon Doors Inc. 8520-ME series). |
| | Anti-Warping Interior Wood Door for Intensive Use: |
| | | Product: 7000-ME (5 ply - LVL Core). Complies with SCLC-5/SCLC-7 (AWI/AWMAC). |
| | | Stiles: 7/8 inch (22 mm) wide hardwood, matched with faces. Bonded to core. 3-5/16 inches (85 mm) LVL rails for hardware installation where indicated or required. |
| | | Top and bottom rails: 7/8 inch (22 mm) in wood or SCL. Bonded to core. |
| | | Core: 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as per ASTM-D5456-93 (LVL). LVL is FSC Certified (UFF). |
| | | Fire Rating: 20-minutes, in compliance with NFPA 80 (Baillargeon Doors Inc. 7020-ME series). |
| | Interior Wood Door for Intensive Use: |
| | | Product: 6000-ME (5 ply - LSL Core) |
| | | Stiles: 7/8 inch (22 mm) wide hardwood, matched with faces. Bonded to core. 3-5/16 inches (85 mm) LVL rails for hardware installation where indicated or required. |
| | | Top and Bottom Rails: |
| | | Core: Laminated strand lumber (LSL). Complies with ANSI 1.S.4 (UFF). |
| | | Fire Rating: 20-minutes, in compliance with NFPA 80 (Baillargeon Doors Inc. 6020-ME series). |
|
  | INSTITUTIONAL FLUSH WOOD INTERIOR DOORS |
 |  | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Particle Core for Intensive Use Interior Wood Door: |
| | | Product: 8600-OO (5 ply - Particle and Agrifiber Core) |
| | | Stiles: Hardwood or laminated strand lumber (LSL) or 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 |
| | | structural glue, as per ASTM-D5456-93 (LVL), including a 7/8 inch (22 mm) piece of hardwood, for a total width of 1-3/16 inches (30 mm) |
| | | Model: |
| | | Top and Bottom Rails: 1-3/16 inches (30 mm) low-density wood or SCL (manufacturer's choice LVL or LSL). |
| | | Core: |
| | | Fire Rating: 20-minutes, in compliance with NFPA 80 (Baillargeon Doors 1nc. 8620-OO series). |
| | Hollow Core for Intensive Use Interior Wood Door: |
| | | Product: 9600-MO (5 ply - Honeycomb Core) |
| | | Stiles: Hardwood or laminated strand lumber (LSL) or 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural |
| | | glue, as per ASTM-D5456-93 (LVL), including a 7/8 inch (22 mm) piece of hardwood, for a total width of 1-3/16 inches (30 mm) |
| | | Model: |
| | | Top and Bottom Rails: 1-3/16 inches (30 mm) low-density wood or SCL (manufacturer's choice LVL or LSL). |
| | | Core: 4-3/4 inches (120 mm) honeycomb (100% recycled). |
| | | Lock Block Construction: |
| | | Fire Rating: 20-minutes, in compliance with NFPA 80 (Baillargeon Doors 1nc. 8620-OO series). |
| | Interior Wood Door: |
| | | Product: |
| | | Stiles: Hardwood or structural composite lumber (SCL), including a 7/16 inch (11 mm) piece of hardwood, for a total width of 1-3/16 inches (30 mm): Bonded to core. |
| | | Model: |
| | | Top and Bottom Rails: 1-3/16 inches (30 mm) low-density wood or SCL (manufacturer's choice LVL or LSL). Bonded to core. |
| | | Core: |
| | | Fire Rating: 20-minutes, in compliance with NFPA 80 (Baillargeon Doors 1nc. Corresponding PC-520-OO and PC-720-OO series). |
|
  | COMMERCIAL FLUSH WOOD INTERIOR DOORS |
|
|
  | FLUSH WOOD INTERIOR FIRE DOORS |
 |  | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Fire Rated Wood Door - Mineral Core: |
| | | Product: 5045/60/90 MO/VE (5 ply - Mineral Core) |
| | | Fire Rating: |
| | | Stiles: Special construction compliant with W/H label requirements. High-density mineral and untreated hardwood (minimum of 3/4 inch (19 mm) |
| | | Stile Provision: |
| | | Top and Bottom Rails: Special construction compliant with W/H label requirements. Mineral or untreated hardwood, manufacturer's choice (minimum of 1-3/8 inches (35 mm). |
| | | Core: Non-combustible mineral. |
| | | Provision: |
| | Fire Rated Wood Door - Agrifiber Core: |
| | | Product: |
| | | Stiles (45 Min Rated): Special construction compliant with W/H label requirements. High-density mineral and/or SCL and untreated hardwood (minimum of 1-7/16 in (37 mm)): |
| | | Stiles (60 Min Rated): Special construction compliant with W/H label requirements. High-density mineral and untreated hardwood (minimum of 1-3/8 in (35 mm)): |
| | | Stile Provision: |
| | | Top and Bottom Rails: Special construction compliant with W/H label requirements. Mineral or SCL, manufacturer's choice (minimum of 2 inches (51 mm)). |
| | | Core: Low combustible Agrifiber. Density of 34-38 lbs per cubic foot. Neutral FSC (UFF). |
| | | Provision: |
|
  | SPECIALTY FLUSH WOOD INTERIOR DOORS |
 |  | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Reduced-Projection Folding Wood Interior Door: Door hinged at 2/3 door width and at door jamb, w/gear hinge, adjustable stainless steel pivots on ball bearings, & a finger guard. |
| | | Product: Autonomy Door 8513-ME (5-ply - Particle Core) |
| | | Stiles: 1/8 in (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as per ASTM-D5456-93 (LVL), including a |
| | | 7/8 inch (22 mm) piece of hardwood, matched with faces, for a total width of 4-3/16 inches (107 mm). |
| | | Top and bottom rails: 1/8 in (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as per ASTM-D5456-93 (LVL), for a total width of 3-5/16 in (85 mm). |
| | | Core: |
| | Ultra-Heavy Duty - High Impact Wood Interior Door: |
| | | Product: 7600-ME (3-ply - LVL Core) |
| | | Stiles: 7/8 inch (22 mm) hardwood stiles bonded to core, matched with faces. |
| | | Top and bottom rails: Integrated. |
| | | Core: 3 ply, with 2 vertical plies composed of 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as |
| | | per ASTM-D5456-93 (LVL), rotary-cut poplar veneer with horizontal crossbanding of the same material. LVL is FSC Certified (UFF). |
| | | Fire Rating: 20-minutes, in compliance with NFPA 80 (Baillargeon Doors Inc. 8120-ME series). |
| | Ultra-Heavy Duty - French Wood Interior Door: |
| | | Product: FR00-ME French Door (5-ply - LVL Core) |
| | | Design: |
| | | Glass Pattern Model Number: |
| | | Glass: |
| | | Glass Stops: |
| | | Stiles: 1/8 in (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as per ASTM-D5456-93 (LVL), including a |
| | | 7/8 inch (22 mm) piece of hardwood, matched with faces, for a total width of 4-3/16 inches (107 mm). |
| | | Top and bottom rails: 1/8 in (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as per ASTM-D5456-93 (LVL), for a total width of 3-5/16 in (85 mm). |
| | | Core: 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue, as per ASTM-D5456-93 (LVL). LVL is FSC certified (UFF). |
| | Sound Retardant Wood Door: |
| | | Product: SR00 – ME. 3 Year Warranty. Gaskets included as tested. |
| | | Sound Retardant Rating: |
| | | Vision light opening not to exceed to 100 sq. inches (64516 sq. mm). |
| | | Stiles: LVL of 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue (phenol formaldehyde), in compliance with ASTM D 5456. |
| | | Bottom Rails: LVL or LSL, for a total width of 3-5/16 inches (85 mm). |
| | | Top Rails: LVL or LSL, for a total width of 1-3/16 inches (30 mm). |
| | | Core: Certified sound dampening. |
| | Radiation Protection Door: |
| | | Product: 8512/8516 ME (Particleboard Core) |
| | | Lead Sheet Thickness: |
| | | Product: 8522/8526 ME (Particleboard Core) |
| | | Lead Sheet Thickness: |
| | | Stiles: LVL of 1/8 in (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue (phenol formaldehyde), in compliance with ASTM D 5456. |
| | | Top and Bottom Rails: LVL of 1/8 inch (3 mm) thick veneer, longitudinally laminated by hot pressing with type 1 structural glue (phenol formaldehyde). |
| | | Core: |
|
  | INTERIOR DOOR TYPES |
 |  | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Door Characteristics: |
| | | Door Thickness: |
| | | Face Material: |
| | | Facing: Medium Density Overlay (MDO). |
| | | Aesthetic Grade: |
| | | Face Grade: |
| | | Veneer Cut: |
| | | Species and Cut: |
| | | Veneer Match: |
| | | Veneer Assembly: |
| | | Matching Requirements: |
| | | Appearance of Doors in Pairs or Sets: |
| | | Appearance of Transoms: |
| | | Finish Location: |
| | | Finish Type: |
| | | Stain: |
|
| 2. When you are finished making selections: |
 | Generate Spec: Word WP or RTF |