1. Configure Dietrich Metal Framing, Inc. - NON-STRUCTURAL METAL FRAMING:
Components
Studs: Cold-formed galvanized steel C-studs, in conformance with AISI Specifications for Design of Cold-formed
Steel Structural Members; Dietrich UltraSTEEL drywall studs.
Designation:
Designation and size as indicated on the drawings.
USTE-20 gauge-equivalent, drywall stud
Fire-Rated Partition:
USTN-25 gauge-equivalent drywall stud
Fire-Rated Partition:
Minimum Delivered Thickness:
0.0179 inches (0.45 mm) or members that can show certified third party testing or in accordance with ICC-ES-AC86 that meets ASTM C645.
0.0296 inches (0.75 mm) or members that can show certified third party testing or in accordance with ICC-ES-AC86 that meets ASTM C645.
Web Sizes:
As indicated on drawings
1-5/8 inches (42 mm)
2-1/2 inches (64 mm)
3-5/8 inches (92 mm)
4 inches (102 mm)
6 inches (152 mm)
Runner Track: Hot-dipped galvanized steel, meeting requirements of ASTM C645; complying with ASTM A1003
and ASTM A653 G40 or equivalent corrosion resistance coating; Dietrich UltraSTEEL drywall runner track.
SLP-TRKŪ Systems Deflection Track: Cold-formed galvanized steel in conformance with AISI's Specifications for
Design of Cold-formed Steel Members.
Minimum Delivered Thickness:
25 gauge, 0.0179 inches (0.45 mm)
20 gauge, 0.0329 inches (0.84 mm)
18 gauge, 0.0428 inches (1.09 mm)
16 gauge, 0.0538 inches (1.37 mm)
14 gauge, 0.0677 inches (1.72 mm)
Furring Channel: Cold-formed galvanized steel in conformance with AISI's North American Specifications for Design of Cold-formed
Steel Structural Members; Dietrich Metal Framing, Inc. furring channel:
Designation:
Designation and size as indicated on the drawings
FCN, 25 gauge, 0.0179 inches (0.45 mm) thick, 7/8 inches (22 mm)
height, 2-11/16 inches (68 mm) width
FCE, 20 gauge, 0.0296 inches (0.75 mm) sheet thickness, 7/8 inches
(22 mm) height, 2-11/16 inches (68 mm) width
FCND, 25 gauge, 0.0179 inches (0.45 mm) sheet thickness, 1-1/2
inches (38 mm) height, 2 7/8 inches (73 mm) width
FCED, 20 gauge, 0.0296 inches (0.75 mm) sheet thickness, 1-1/2
inches (38 mm) height, 2-7/8 inches (73 mm) width
U Channel: Cold-formed galvanized steel; Dietrich Metal Framing, Inc. U channel
Designation:
Designation and size as indicated on the drawings.
CHN1, galvanized, 16 gauge, 0.0538 inches (1.52 mm) steel thickness, 3/4 inches (19.1 mm) size
CHN2, galvanized, 16 gauge, 0.0538 inches (1.52 mm) steel thickness, 1 1/2 inches (38 mm) size
CHN3, galvanized, 16 gauge, 0.0538 inches (1.52 mm) steel thickness, 2 inches (51 mm) size
H Studs and Track: Cold-formed galvanized steel, approved for the use intended based on ICC's current
Research Report; Dietrich Metal Framing
Designation:
Designation and size as indicated on the drawings
Unhemmed H stud; 2 inches (51 mm), 10-foot (3 m) length, 25 gauge, 0.0179 inches (0.45 mm)
Hemmed H stud; 2 inches (51 mm), 10-foot (3 m) length, 25 gauge, 0.0179 inches (0.45 mm)
C-T Studs and Tabbed J Track: Cold-formed galvanized steel, approved for the use intended based on a
current National Evaluation Service Report; Dietrich Metal Framing, Inc. C-T Studs and J-Tabbed Track.
Designation:
Designation and size as indicated on the drawings
C-T stud with J track, 2-1/4 inches (57 mm) leg
C-T stud with J track, 3 inches (76 mm) leg
Size:
2-1/2 inches (64 mm)
4 inches (102 mm)
6 inches (152 mm)
Sheet Thickness:
25 gauge
20 gauge
Deflection Limitation:
L/120
L/180
L/240
L/360
Metal Trims: Cold-formed galvanized steel.
Type:
Type and Size as indicated on the drawings.
J Trim
Designation:
M400, 3/8 inches (9.5 mm) size, 1-1/4 inches (32 mm) leg
M401, 1/2 inches (12.7 mm) size, 1-1/4 inches (32 mm) leg
M402, 5/8 inches (15.9 mm) size, 1-1/4 inches (32 mm) leg
U Trim
M20A, 1/2 inches (12.7 mm) size, 1 inch (25.4 mm) leg
M20A, 5/8 inches (15.9 mm) size, 1 inch (25.4 mm) leg
L Trim
M20B, 1/2 inches (12.7 mm) size, 1 inch (25.4 mm) leg
M20B, 5/8 inches (15.9 mm) size, 1 inch (25.4 mm) leg
Drywall Corner Bead: Cold-formed galvanized steel sheet
Flat Strap and Backing Plate: Sheet for blocking and bracing in length and width indicated.
Galvanized Sheet Steel:
Minimum Base-Metal Thickness:
As indicated on Drawings
0.0179 inch (0.45 mm)
0.0296 inch (0.75 mm)
Subject to compliance with requirements, provide:
Dietrich Metal Framing, Inc. Danback Fire Treated Wood Backing Plate D16F
Dietrich Metal Framing, Inc. Danback Fire Treated Wood Backing Plate D24F
Channel Bridging: 0.0538-inch (1.37-mm) bare metal thickness, with minimum 1/2-inch-(12.7 mm) wide flanges.
Depth:
As indicated on Drawings
3/4 inch (19.1 mm)
1-1/2 inches (38.1 mm)
2 inches (50.8 mm)
Clip Angle:
U543
U545
U547
Resilient Furring Channels: 1/2-inch (12.7 mm) deep, steel sheet members designed to reduce sound
transmissions:
Resilient Channel [RCSD]
Resilient Channel [RCUR]
Radius Framing: Steel sheet runner for non-structural curves, bends, variable radii and arches. Designed to
providehigher strength capacity than conventional lighter gauge material by using a work-hardened steel
base strip.
Minimum Base-Metal Thickness:
As indicated on Drawings
0.0179 inch (0.45 mm)
0.0296 inch (0.75 mm)
Size:
2-1/2 inches
3-5/8 inches
6 inches
As indicated on Drawings
Framing Component Accessories: Provide the following accessories as required for a complete system.
EasyClip Clip Angle
Angles
Backing Strip
Fasteners: Self-drilling, self-tapping screws; steel, complying with ASTM C 1513; galvanized coating, plated or
oil-phosphate coated complying with ASTM B 633 as needed for required corrosion resistance.
Touch-Up Paint: Zinc rich, containing 95-percent metallic zinc, ZRC 350 as manufactured by ZRC Worldwide,
Marshfield, MA.
Non-Hardening, Flexible Sealant: Latex acrylic.
Install cold-formed framing in accordance with requirements of ASTM C 754.
Fire-Rated Partition:
 2. When you are finished making selections:
  Generate Spec: Word     WP   or   RTF