 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | Material: |
| | | | | Heavy duty extruded aluminum 0.050 inches (1.3 mm) thick; with |
| | | | | | | White baked acrylic enamel finish. |
| | | | | | | Clear anodized finish. |
| | | | | Ultra Cube I.V. Track: Heavy duty extruded aluminum, with |
| | | | | | | White baked acrylic enamel finish. |
| | | | | | | Clear anodized finish. |
| | | | Dimensions: 1-1/8 inches (29 mm) high by 1-1/4 inches (32 mm) wide. |
| | | ** NOTE TO SPECIFIER ** Straight sections are available in the following lengths: 7 feet (2100 mm), 8 feet (2440 mm), 12 feet
(3660 mm), and 16 feet (4880 mm). Bent sections are: 1 foot (305 mm) by 1 foot (305 mm) angled 60 degrees, 2 feet (610 mm)
by 2 feet (610 mm) angled 45 degrees or 90 degrees, 3 feet (914 mm) by 3 feet (914 mm) angled 90 degrees, or 4 feet (1219 mm)
by 4 feet (1219 mm) angled 90 degrees. |
| | | | Provide straight and bent sections as indicated on drawings. |
| | | | Track Attachment: |
| | | | | Flush panel T-bar grid clip: |
| | | | | | | Standard. |
| | | | | | | Swivel. |
| | | | | | | Suspended support set. |
| | | | | Tegular edge grid clip: |
| | | | | | | Standard. |
| | | | | | | Swivel. |
| | | | | | | Suspended support set. |
 | | | | | | Provide extruded aluminum splice to join track sections in a color matching the track. |
| | | | | Provide molded thermoplastic end caps in a color matching the track. |
| | | | | Provide molded thermoplastic end caps with hook in a color matching the track. |
| | | | | Provide extruded aluminum end cap in a color matching the track. |
| | | | | Provide I.V. end caps in a color matching the track. |
| | | | | Provide locking switch unit with spring action shuttle and two pull chains. |
| | | | | Provide angle bracket for level support on suspended ceiling. |
| | | | Provide adjustable 24 inch (610 mm) chain wand to move curtain. |
| | | | | Provide safety loading unit with durable hinge, locking mechanism, and wand operation. |
| | | | | Provide at least one 45 inch (1143 mm) wand per 20 loading units. |
| | | | Provide latch suspension support set. |
| | | | | Provide hard ceiling support set. |
| | | | | Provide post for support set, 5/8 inch (16 mm) extruded aluminum, white acrylic enamel finish. |
| | | | Curtain Carriers: |
| | | | Provide 48 inch (1219 mm) wall mounted curtain tieback chain. |
| | | | Provide fabric curtain tie back, 3 inch (76mm) wide by 18 inch (457mm) long. |
| | | | Provide adjustable curtain drop chain for proper curtain height, trimmed on site. |
| | | | I.V. Support Carriage: |
| | | | I.V. Bottle Holder: |