1. Configure Willard Shutter Company Inc. - GRILLES AND SCREENS:

LOUVERED ALUMINUM SCREEN PANELS

Louver Blades: Roll-formed into converse beveled-edge design, 1-3/4 in (44.5 mm) wide, and spaced as follows:

Louver Blade Spacing: SELECT LOUVER BLADE SPACING--------------------1-1/4 in (32 mm) on center1-1/2 in (38 mm) on center1-3/4 in (44.5 mm) on center

Aluminum Finish: Low gloss polyester enamel paint, roller coated over pretreated aluminum and baked at 400 degrees F (204 degrees C)

Color: SELECT COLOR--------------------As selected from manufacturer's standard colorsColor: _________________.

PITCHED LOUVERED SCREENS

Construction: Individual roll-formed aluminum blades snapped onto reinforced aluminum stringers spaced at 24 in (610 mm) on center, which in turn are supported by custom superstructure

Configuration below allows for privacy when used in window applications and is best for concealing equipment that does not require large amounts of air flow

Vertical Stringers: Stamped aluminum members formed into a U-shape in plan, 2.625 in (66.7 mm)      deep, and configured for 22.5 degree louver pitch, allowing 30 percent free air flow

Configuration below is best for concealing machinery with large air flow requirements

Vertical Stringers: Stamped aluminum members formed into a U-shape in plan, 4.0 in (101.6 mm) deep,      and configured for 45 degree louvre pitch, allowing 60 percent free air flow

Aluminum Finish: Low gloss polyester enamel paint, roller coated over pretreated aluminum and baked at 400 degrees F (204 degrees C)

Color: SELECT COLOR--------------------As selected from manufacturer's standard colorsColor: _________________.

FLAT PICKET SCREENS

Construction: Individual roll-formed aluminum pickets snapped onto extruded horizontal aluminum stringers spaced at 24 in (610 mm) on center, which in turn are supported by custom superstructure

Configuration below allows for privacy when used in window applications and is best for concealing equipment that does not require large amounts of air flow

Horizontal Stringers: Extruded aluminum members of alloy 6061-T6 or equivalent per ASTM B 221 (ASTM B 221M), 0.040 in (1.0 mm) thick, formed into a 1.5 in (38 mm) deep hat shape, with punched clips pr

Configuration below is best for concealing machinery with large air flow requirements

Vertical Slats: Aluminum alloy 3005-H26 or equivalent per ASTM B 209 (ASTM B 209M), 3.375 in wide members roll-formed into shallow channel shape and designed to snap onto horizontal stringers

Aluminum Finish: Low gloss polyester enamel paint, roller coated over pretreated aluminum and baked at 400 degrees F (204 degrees C)

Color: SELECT COLOR--------------------As selected from manufacturer's standard colorsColor: _________________.

2. When you are finished making selections:

Generate Spec: Word     WP   or   RTF