11160 - LOADING DOCK EQUIPMENT ARCAT SpecWizard

1. Configure Blue Giant Equipment Corporation - DOCK SEALS:

DOCK SEALS

Model CDS1000: Dock door seal

Fixed Head Pad Truck Dock Seal:

Profile:

Accessories:

Wear Pleats: Extra fabric flaps shall be sewn to the front of the side pads and head pads or curtain to provide added durability and to
extend the life of the seal.

Enhanced Wear Face: Extra layer of fabric sewn directly onto heavy wear areas - front of side pads, inside the wedge area or across
the head pad face.

Build-outs: Wooden frames constructed and covered with fabric, designed to extend the seal beyond an extra deep dock or platform
situation.

Galvanized steel back board.

Model CDS1000: Dock door seal

Adjustable Curtain Truck Dock Seal:

Profile:

Accessories:

Wear Pleats: Extra fabric flaps shall be sewn to the front of the side pads and head pads or curtain to provide added durability and to
extend the life of the seal.

Wear Face: Extra layer of fabric sewn directly onto heavy wear areas - front of side pads, inside the wedge area or across the head
pad face.

Build-outs: Wooden frames constructed and covered with fabric, designed to extend the seal beyond an extra deep dock or platform
situation.

Galvanized steel back board.

Model LP1000: Dock door seal

L-Pad Style Compression Seal:

Projection:

Exposure:

Accessories:

Secondary Drop Curtain.

Rain Trough: Fits across the front edge of canopy header to deflect rain water to the sides of truck and door opening.

Note: The following two options are recommended for heavy dock traffic.

Wear Pleats: Extra fabric flaps can be sewn to the front of the side pads and head pads or curtain to provide added durability and
to extend the life of the seal.

Enhanced Wear Face: Extra layer of fabric sewn directly onto heavy wear areas - front of side pads, inside the wedge area or across
the head pad face.

Fixed-lip: Stops the flow of air by filling the gap left by swing-type trailer doors.

Model LP2000: Dock door seal

L-Pad Style Compression Seal:

Projection:

Exposure - Side Pad Pleats:

Exposure - Corner Pad Pleats:

Accessories:

Secondary Adjustable Drop Curtain.

Rain Trough: Fits across the front edge of canopy header to deflect rain water to the sides of truck and door opening.

Note: The following two options are recommended for heavy dock traffic.

Wear Pleats: Extra fabric flaps can be sewn to the front of the side pads and head pads or curtain to provide added durability and to
extend the life of the seal.

Enhanced Wear Face: Extra layer of fabric sewn directly onto heavy wear areas - front of side pads, inside the wedge area or across
the head pad face.

Fixed-lip: Stops the flow of air by filling the gap left by swing-type trailer doors.

DOCK SHELTERS

DOCK BUMPERS

Dock bumpers, two per dock leveler:

Rubber Bumpers: Molded and shall be made of nylon cord reinforced rubber compound. Mounting holes shall be recessed to prevent damage.

Models:

Standard Model:DB11 - 4-1/2 inches D by 14 inches W by 10 inches H (114 mm D by 356 mm W by 254 mm H). Standard with all dock levelers(Comes with Dock Leveler)

Upgraded Models:

Laminated Bumper: Laminated and shall be made of nylon impregnated heavy-duty industrial rubber and punched to receive 5/8 inch (16mm) supporting rod.

Bumper material shall be assembled with two 3 inches by 3 inches by 1/4 inch (76 by 76 by 6mm) thick steel angles, factory painted and fastened with threaded
rod and nut.

Models:

Standard Model: DB411 - 4-1/2 inches D by 14 inches W by 10 inches H (114 mm D by 356 mm W by 254 mm H).(Comes with Dock Leveler)

**Model 'VS' - Hydraulic's Standard Model is DB412.**

Upgraded Models:

Accessories:

Single flange laminated bumper (for wide docks).

Bumper risers (vertical).

Bumper extensions (horizontal).

Steel face plate (reduces bumper wear).

MECHANICAL DOCK LEVELERS

Note: All levelers come with a standard bumper, upgrades can be selected from the Dock Bumpers Section.

Dock Leveler shall be 'C' Series Dock Leveler Model 'FMC' - Mechanical:

Dock Leveler shall be mechanical type and complete with locking hold down mechanism and 4 inches (102 mm) maintained
deck tilt. Recessed, pit installed hinged dock leveler:

Model:

Rated Capacity:

Safety Device:

Note: The following item may be optional in certain markets, consult manufacturer.

Working range metal toe guard protection.

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck.

18 inches (457 mm) long lip (adds 2 inches (51 mm) to length of standard models).

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Vehicle restraint to keep trailer securely stationed at the loading dock.

Full operating range metal toe guard protection.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Dock leveler shall be 'A' Series Dock Leveler Model 'M' - Mechanical:

Recessed, pit installed hinged dock leveler. Manually operated dock leveler shall be mechanical and complete with locking
hold down mechanism and 4 inches (102 mm) maintained deck tilt:

Model:

Capacity:

Safety Device:

Note: The following item may be optional in certain markets, consult manufacturer.

Working range metal toe guard protection.

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck.

18 inches (457 mm) long lip (adds 2 inches (51 mm) to length of standard models).

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Vehicle restraint to keep trailer securely stationed at the loading dock.

Full operating range metal toe guard protection.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Dock Leveler shall be Mantis series mechanical dock leveler model 'MTS-M'

Type: Recessed, pit installed hinged dock leveler. Manually operated complete with disk brake locking hold down mechanism
and 4 inches (102 mm) lateral ramp flex.

Model:

Capacity:

Safety Device:

Note: The following item may be optional in certain markets, consult manufacturer.

Mechanical fall safe legs to limit free fall and below level lip control for end-loading.

Accessories:

Foam insulation underside of deck.

Under deck support for 3-wheel lift truck applications.

Side and rear rubber style weather seals.

Side and rear nylon brush weather seals.

18 inches and 20 inches (457 and 508 mm) long lips.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Vehicle restraint to keep trailer securely stationed at the loading dock.

Provide full operating range metal toe guard protection.

HYDRAULIC DOCK LEVELERS

Note: All levelers come with a standard bumper, upgrades can be selected from the Dock Bumpers Section.

Series XDS2000: Dock Leveler and Safety Barrier

Door and Dock Guard Type: Electro-hydraulic operated solid steel barrier incorporated into the deck designed to protect forklifts from

accidental roll-off when the overhead door is open & protects overhead door panels & tracks from impact damage when door is closed.

Dock Leveler: Complete with hydraulic lip and deck cylinders and 4 inches (102 mm) maintained deck tilt on dock leveler high hydraulic
roll-off guard/barrier.

Model:

Lip Extensions:

Capacity:

Finish:

Accessories:

Weather Seals:

Foam insulation underside of deck.

Remote mounted power pack on 24 feet (7,315mm) hydraulic hose.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Overhead door interlock switch.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Six mounting bolts.

Series XDS3000: Dock Leveler, Safety Barrier and Vehicle Restraint

Door and Dock Guard Type: Electro-hydraulic operated solid steel barrier incorporated into the deck designed to protect forklifts from

accidental roll-off when the overhead door is open & protects overhead door panels & tracks from impact damage when door is closed.

Dock Leveler: Complete with hydraulic lip and deck cylinders and 4 in (102 mm) maintained deck tilt on dock leveler, 7.5 in (190 mm)

high hydraulic roll-off guard/barrier, safety vehicle restraint, interior/exterior communications light package and driver warning signs.

Model:

Lip Extension:

Capacity:

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck - dock.

Remote mounted power pack on 24 feet (7,315mm) hydraulic hose - dock.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Flood proof NEMA6P switch for standing water or flooding - restraint.

Extension plates to suit extended dock leveler pits - restraint.

Overhead door interlock switch.

45 degree actuating arm, increases horizontal service range - restraint.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Note: Available Outside North America Only.

Model 'FHC': Dock Leveler shall be hydraulic 'C' Series

Recessed, pit installed hinged dock leveler. Electro-hydraulic operated.

Model:

Lip Extension:

Capacity:

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck.

Remote mounted power pack on 24 feet (7,315mm) hydraulic hose.

Automatic dock leveler return to cross traffic position.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Vehicle restraint to keep trailer securely stationed at the loading dock.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Model 'FHC' / 'TL85' - Hydraulic Dock Leveler shall be hydraulic 'C' Series

Recessed, pit installed hinged dock leveler. Electro-hydraulic operated.

Model:

Lip Extension:

Capacity:

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck - dock.

Remote mounted power pack on 24 feet (7,315mm) hydraulic hose - dock.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Flood proof NEMA6P switch for standing water or flooding - restraint.

Extension plates to suit extended dock leveler pits - restraint.

Overhead door interlock switch.

45 degree actuating arm, increases horizontal service range - restraint.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Model 'MTS-H' Dock Leveler shall be hydraulic Mantis Series

Recessed, pit installed hinged dock leveler. Electro-hydraulic operated.

Model:

Capacity:

Accessories:

Foam insulation underside of deck.

Under deck support for 3-wheel lift truck applications.

Side and rear rubber style weather seals.

Side and rear nylon brush weather seals.

18 inches and 20 inches (457 and 508 mm) long lips.

Remote mounted power pack on 24 feet (7,315 mm) hydraulic hose.

Automatic dock leveler returns to cross traffic position.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Vehicle restraint to keep trailer securely stationed at the loading dock.

Model 'MTS-H' / 'TL85' Dock Leveler shall be hydraulic Mantis Series Dock Leveler and Restraint Combo

Recessed, pit installed hinged dock leveler. Electro-hydraulic operated.

Model:

Capacity:

Accessories:

Foam insulation underside of deck.

Under deck support for 3-wheel lift truck applications.

Side and rear rubber style weather seals.

Side and rear nylon brush weather seals.

18 inches and 20 inches (457 and 508 mm) long lips.

Remote mounted power pack on 24 feet (7,315 mm) hydraulic hose.

Automatic dock leveler returns to cross traffic position.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Vehicle restraint to keep trailer securely stationed at the loading dock.

Model 'FH' - Hydraulic Dock Leveler shall be hydraulic 'A' Series

Recessed, pit installed hinged dock leveler. Electro-hydraulic operated with independent control of deck and lip.

Model:

Lip Extension:

Capacity:

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck.

Remote mounted power pack on 24 feet (7,315 mm) hydraulic hose.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Vehicle restraint to keep trailer securely stationed at the loading dock.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Model 'FH' / 'TL85' - Hydraulic Dock Leveler shall be hydraulic 'A' Series Dock Leveler & Vehicle Restraint Combo

Recessed, pit installed hinged dock leveler. Electro-hydraulic operated with independent control of deck and lip.

Model:

Lip Extension:

Capacity:

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck - dock.

Remote mounted power pack on 24 feet (7,315 mm) hydraulic hose - dock.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Flood proof NEMA6P switch for standing water or flooding - restraint.

Extension plates to suit extended dock leveler pits - restraint.

Overhead door interlock switch.

45 degree actuating arm, increases horizontal service range - restraint.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Model 'FHE' - Hydraulic Dock Leveler shall be hydraulic 'A' Series

Recessed, pit installed hinged dock leveler. Electro-hydraulic operated.

Model:

Lip Extension:

Capacity:

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck.

Remote mounted power pack on 24 feet (7,315mm) hydraulic hose.

Automatic dock leveler return to cross traffic position.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Vehicle restraint to keep trailer securely stationed at the loading dock.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Model 'FHE' / 'TL85' Combo - Hydraulic Dock Leveler shall be hydraulic 'A' Series Dock Leveler & Vehicle Restraint Combo

Recessed, pit installed hinged dock leveler. Electro-hydraulic operated.

Model:

Lip Extension:

Capacity:

Finish:

Accessories:

Side weather seals:

Rear weather seals:

Foam insulation underside of deck - dock.

Remote mounted power pack on 24 feet (7,315mm) hydraulic hose - dock.

Pour-in pan (dock leveler welded to a steel pan, allowing it to be "poured in place" after concrete slab is poured).

Clean pit access-dock.

Flood proof NEMA6P switch for standing water or flooding - restraint.

Extension plates to suit extended dock leveler pits - restraint.

Overhead door interlock switch.

45 degree actuating arm, increases horizontal service range - restraint.

Pit kits; advanced shipped panels for pit fabrication.

Curb Angles:

Model 'VS' - Hydraulic Recessed, pit installed hinged dock leveler in vertical storing.

Model:

Lip Extension:

Capacity:

Finish:

Accessories:

10 inches vertical bumper risers.

Arctic oil.

VEHICLE (TRUCK) RESTRAINTS

EDGE-OF-DOCK LEVELERS (FLIP RAMP)

DOCK LIFTS

Model ED - Stationary Hydraulic: Scissor dock lift shall be stationary type LoMaster Series

Floor or pit installed, single scissor dock lift. Electro-hydraulic operated. Lift speed based on evenly distributed loads.

4000 lb capacity with 5 HP remote power pack:

5000 lb capacity with 5 HP remote power pack:

6000 lb capacity with 5 HP remote power pack:

8000 lb capacity with 5 HP remote power pack:

10000 lb capacity with 5 HP remote power pack:

12000 lb capacity with 5 HP remote power pack:

15000 lb capacity with 5 HP remote power pack:

20000 lb capacity with 5 HP remote power pack:

Lip size and configuration as indicated or required.

Spring assisted lips for ease of handling on heavier capacity.

Aluminum lips.

Hydraulically actuated lip.

Electric trip bars (to stop unit in case of down travel obstruction).

Accordion safety skirting.

Mechanical roll-off barrier.

Warning bell (to indicate lift in motion).

Warning horn with adjustable volume control mounted on power unit (to indicate lift in motion).

Flashing amber warning beacon mounted on power pack.

24VAC control.

Up travel limit switch.

Return line oil filter.

Model 'S': Scissor dock lift shall be semi-portable type

Floor installed, single scissor dock lift. Electro-hydraulic operated. Capacity based on evenly distributed loads.

4000 lb (1814 kg) capacity:

5000 lb (2268 kg) capacity:

6000 lb (2722 kg) capacity: Deck Size - 72 inches (1829 mm) W by 96 inches (2438 mm)

Lip size and configuration as indicated or required.

Spring assisted lips for ease of handling on heavier capacity.

Aluminum lips.

Portable dolly (makes unit portable).

Electric trip bars (to stop unit in case of down travel obstruction).

Warning bell (to indicate lift in motion).

Warning horn with adjustable volume control mounted on power unit (to indicate lift in motion).

Flashing amber warning beacon mounted on power pack.

4VAC control.

Up travel limit switch.

Return line oil filter.

2. When you are finished making selections:

Generate Spec:

Word

WP or

RTF