| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| 1. Configure Ascension/a division of AGM - WHEELCHAIR LIFTS: |
 | | ASCENSION VIRTUOSO 5460F MODEL SERIES VERTICAL WHEELCHAIR LIFT |
| | Physical Characteristics: |
| | | Lifting Capacity: 750 pounds (341 kg). |
| | | Vertical Speed: seven (7) feet per minute (2.1 meters per minute). |
| | | Vertical Travel: 12 inches (304 mm) to 60 inches (1524 mm) maximum lifting height. |
| | | Standard Platform Gate Configuration: the upper landing platform gate shall be left-hinged when facing the lift from the upper landing;
the lower landing platform gate shall be right-hinged when facing the lift from the lower landing. |
| | ** NOTE TO SPECIFIER ** Contact Ascension for custom platform gate configurations. |
| | Dimensions: |
| | | Platform Size: 36 inches by 54 inches (914 mm x 1371 mm) with 43 inch (1092 mm) high sidewalls and platform gates. |
| | | Maximum Height: 44 inches (1117 mm) high when the platform is on the ground, except when the optional stage guard is being used. |
| | Materials: |
| | | Base Frame and Guide Rails: ASTM A 36 structural steel, 1/4 inch (6.35 mm) thick minimum. |
| | | Platform: ASTM A 36, AISI 1018, or AISI 1020 Steel. |
| | | Windows: 1/4 inch (6.35 mm) thick high impact strength clear thermoplastic. |
| | | Safety Skirt: Rigid Plastic. |
| | Finish: |
| | | All metal components shall be thoroughly cleaned to remove any foreign substance. Exposed metal surfaces shall be finished with an oven-
baked powder coating. |
| | | Color: |
| | | Drive: Direct-acting hydraulic. |
| | Electrical Requirements: |
| | | Power Source: 120VAC, 60 hertz, single phase, 15 amp service line provided by others. |
| | ** NOTE TO SPECIFIER ** International electrical configurations are available. |
| | | Control and Operating Circuits: 12V DC power supply. |
| | | Disconnect: Lockable fused disconnect in accordance with NFPA 70 (NEC). |
| | Safety Devices: |
| | | Grounded electrical system. |
| | | 12 VDC operating controls. |
| | | Constant pressure operating switches. |
| | | Emergency stop button at passenger control station. |
| | | Electro-mechanical interlock to prevent accidental opening of lower landing side platform gate. |
| | | Switches to prevent platform movement if either platform gate is open. |
| | | Safety skirt that completely encloses and protects the area under the platform, with switches to stop platform movement in the case of
excess skirt deflection. |
| | | 43 inch (1092 mm) high sidewalls and platform gates. |
| | | Unobstructed view through transparent sidewalls and platform gates. |
| | | Grab bar extending full length of inside wall. |
| | | Slip resistant surfaces on platform floor. |
| | | Structural safety factors as specified in ASME A18. |
| | | Self-closing platform gates. |
| | | Alarm and lighted alarm switch on platform. |
| | | | Upper landing gate. |
| | Operation: |
| | | Three (3) constant pressure "UP/DOWN" switches, located outside of the platform at both ends and inside the platform. |
| | | Passenger control station is provided with a separate "PUSH TO STOP" emergency button. The emergency stop button will lock when pushed
and require manual reset before operation can resume. |
| | | The lower landing side platform gate is provided with a mechanical interlock that prevents the platform gate from being opened whenever
the platform is more than 2 inches (50 mm) above the full down position. |
| | ASCENSION VIRTUOSO 5460P MODEL SERIES VERTICAL PORTABLE WHEELCHAIR LIFT |
| | Physical Characteristics: |
| | | Lifting Capacity: 750 pounds (341 kg). |
| | | Weight of Lift: 1025 pounds maximum (465 kg). |
| | | Vertical Speed: seven (7) feet per minute (2.1 meters per minute). |
| | | Vertical Travel: 12 inches (304 mm) to 60 inches (1524 mm) maximum lifting height. |
| | | Standard Platform Gate Configuration: the upper landing platform gate shall be left-hinged when facing the lift from the upper landing; the
lower landing platform gate shall be right-hinged when facing the lift from the lower landing. |
| | Dimensions: |
| | | Platform Size: 36 inches by 54 inches (914 mm x 1371 mm) with 43 inch (1092 mm) high sidewalls and platform gates. |
| | | Space Requirements (operational, storage, and transport): 44 inches (1117 mm) high (in the down position), 66 inches (1677 mm) long, 48
inches (1219 mm) wide. |
| | | Maximum Height: 44 inches (1117 mm) high when the platform is on the ground, except when the optional stage guard is being used. |
| | Materials: |
| | | Platform, Base Frame and Guide Rails: ASTM A 36, AISI 1018, or AISI 1020 Steel. |
| | | Windows: 1/4 inch (6.35 mm) thick high impact strength clear thermoplastic. |
| | | Safety Skirt: Rigid Plastic. |
| | Finish: |
| | | All metal components shall be thoroughly cleaned to remove any foreign substance. Exposed metal surfaces shall be finished with an oven-
baked powder coating. |
| | | Color: |
| | Electrical Requirements: |
| | | Power Source: 120VAC, 60 hertz, single phase, 15 amp service line provided by others. |
| | ** NOTE TO SPECIFIER ** International electrical configurations are available. |
| | | Power Cord: 20 foot (6096mm), three prong grounded electrical cord. |
| | | Control and Operating Circuits: 12V DC power supply. |
| | | Electrical Protection: Ground Fault Circuit Interrupter (GFCI). |
| | | Hydraulic Pump: Directly coupled to a capacitor start 1/2 hp motor. |
| | Safety Devices: |
| | | Grounded electrical system. |
| | | 12 VDC operating controls. |
| | | Constant pressure operating switches. |
| | | Emergency stop button at passenger control station. |
| | | Electro-mechanical interlock to prevent accidental opening of lower landing side platform gate. |
| | | Switches to prevent platform movement if either platform gate is open. |
| | | Lift platform stop height switch. |
| | | Safety skirt that completely encloses and protects the area under the platform. |
| | | 43 inch (1092 mm) high sidewalls and platform gates. |
| | | Unobstructed view through transparent sidewalls and platform gates. |
| | | Grab bar extending full length of inside wall. |
| | | Slip resistant surfaces on platform floor and dock plate. |
| | | Structural safety factors as specified in ASME A18.1. |
| | | Self-closing platform gates. |
| | Portability / Mobility: |
| | | 3 1/2 inch (89 mm) diameter hard rubber casters must be easily attached to the platform for portability and stored in the base frame
when not in use. |
| | | Casters must be capable of being installed without tools. |
| | | When the casters are installed, the lift must roll easily over any hard, smooth, level surface. |
| | | The lift must be movable by fork lift or truck. |
| | | The lift must be capable of being compressed to 33 inches (838 mm) wide to facilitate relocation through a 36 inch (914 mm) wide doorway. |
| | Operation: |
| | | Three (3) constant pressure "UP/DOWN" switches, located outside of the platform at both ends and inside the platform. |
| | | Passenger control station is provided with a separate "PUSH TO STOP" emergency button. The emergency stop button will lock when pushed
and require manual reset before operation can resume. |
| | | The platform stop height must be adjustable without the use of tools. |
| | | Opening the upper landing platform gate deploys a dock plate that rests on the upper landing surface. The dock plate provides a smooth
transition between the platform and the upper landing. Closing the upper landing platform gate retracts the dock plate. |
| | | The lower landing platform gate is provided with a mechanical interlock that prevents the platform gate from being opened whenever the
platform is more than 2 inches (50 mm) above the full down position. |
| 2. When you are finished making selections: |
| Generate Spec:  Word  WP or  RTF |